Phone Charger Holder

Ever find yourself charging your phone on a wall outlet and leaving the phone on the floor? 

Before you throw away that empty shampoo or bodywash bottle take a look at what we did.

We use an empty Johnson Baby Wash bottle and our Oh Joy wash tape roll that is 8" thick.

You will also need a knife blade and a marker.

Follow how we trace out how to cut the empty bottle.

Ones you have trace out the shape where to cut, find a flat and secure surface like a cutting mat so that the bottle does not slip as you cut through the plastic bottle. 

Make sure to use a new blade to make it easy to cut through.

 Here is how it should look like ones you have cut it out.

 One more last cut to do. Measure the width or height of your charger plug and make sure to cut the hole to fit the charge. This hold will be hanging or holding on to that as you use this.

Here it is!

Now the fun part! Pull out or roll out the wash tape and measure out just enough to cover the whole plastic case. You can use a 2" or 4" thick washie tape as well but we wanted to keep that one piece pattern look so we opted for the 8" washie tape. 

Voila! Check out our DIY charge holder!